Development of hybrid model and optimization of metal removal rate in electric discharge machining using artificial neural networks and genetic algorithm GKM Rao, GR Janardhana, DH Rao, MS Rao ARPN Journal of Engineering and Applied Sciences 3 (1), 19-30, 2008 | 53 | 2008 |
Optimized high speed turning on Inconel 718 using Taguchi method based Grey relational analysis B Satyanarayana, GR Janardhana, DH Rao NISCAIR-CSIR, India, 2013 | 31 | 2013 |
Performance evaluation and selection of optimal cutting conditions in turning of Ti-6Al-4V alloy under different cooling conditions MV Ramana, K Srinivasulu, GKM Rao, DH Rao International Journal of Innovative Technology and Creative Engineering 1 (5 …, 2011 | 29 | 2011 |
Optimization and effect of process parameters on tool wear in turning of titanium alloy under different machining conditions MV Ramana, GKM Rao, DH Rao Int. J. Mater. Mech. Manuf 2 (4), 272, 2014 | 26 | 2014 |
Experimental investigations, optimization of process parameters and mathematical modeling in turning of titanium alloy under different lubricant conditions MV Ramana, AV Vishnu, GKM Rao, DH Rao Journal of Engineering (IOSRJEN) www. iosrjen. org ISSN 2250, 3021, 2012 | 24 | 2012 |
Effect of process parameters on surface roughness in turning of titanium alloy under different conditions of lubrication MV Ramana, AV Vishnu, GKM Rao, DH Rao Recent Adv. Robot. Aeronaut. Mech. Eng 3, 83-91, 2012 | 19 | 2012 |
Evolution of Artificial Neural Network (ANN) model for predicting secondary dendrite arm spacing in aluminium alloy casting D Hanumantha Rao, GRN Tagore, G Ranga Janardhana Journal of the Brazilian Society of Mechanical Sciences and Engineering 32 …, 2010 | 18 | 2010 |
Chip morphology in turning of Ti-6Al-4V alloy under different machining conditions MV Ramana, GKM Rao, DH Rao J. Prod. Eng 17 (1), 27-32, 2014 | 17 | 2014 |
Experimental investigation to study the influence of process parameters in dry machining M Prasad, GR Janardhana, DH Rao Delta 3 (7.06), 7.177, 2006 | 16 | 2006 |
Modeling and analysis of resin bonded sand mould system using design of experiments and central composite design B Surekha, DH Rao, GKM Rao, PR Vundavilli, MB Parappagoudar Journal for Manufacturing Science and Production 12 (1), 31-50, 2012 | 15 | 2012 |
Hybrid modeling and optimization of hardness of surface produced by electric discharge machining using artificial neural networks and genetic algorithm GKM Rao, DH Rao ARPN Journal of Engineering and Applied Sciences 5 (5), 72-81, 2010 | 15 | 2010 |
Optimization of EDM process parameters and Graphite powder concentration on electrical Discharge machining of Ti-6Al-4V alloy using Taguchi method B Gugulothu, DH Rao, GKM Rao Int. J. Adv. Prod. Mech. Eng 1 (5), 31-44, 2015 | 12 | 2015 |
Influence of drinking water and graphite powder concentration on electrical discharge machining of Ti-6Al-4V alloy B Gugulothu, GKM Rao, DH Rao Materials Today: Proceedings 27, 294-300, 2020 | 11 | 2020 |
Design and development of knowledge base scheme for chromite-based resin bonded sand core system B Surekha, DH Rao, GKM Rao, PR Vundavilli Procedia materials science 6, 919-925, 2014 | 11 | 2014 |
Experimental investigations on tool wear in turning of Ti-6Al-4V alloy under different machining environmental conditions MV Ramana, GKM Rao, DH Rao International Journal of Manufacturing Research 11 (4), 339-355, 2016 | 9 | 2016 |
Mould filling ability characterisation of cast aluminium alloys using design of experiments S Santhi, SB Sakri, D Hanumantha Rao, S Sundarrajan Journal of Metallurgy 2012, 2012 | 8 | 2012 |
Multi objective optimization of process parameters in turning of Ti-6Al-4V alloy MV Ramana, GKM Rao, DH Rao Materials Today: Proceedings 5 (9), 18966-18974, 2018 | 7 | 2018 |
Experimental investigations on machining of titanium alloy under different machining environments MV Ramana, GKM Rao, DH Rao Recent Advances in Mechanical Engineering Applications, 137-145, 2013 | 6 | 2013 |
Prediction of resin bonded sand core properties using fuzzy logic B Surekha, DH Rao, GK Rao, PR Vundavilli, MB Parappagoudar Journal of Intelligent & Fuzzy Systems 25 (3), 595-604, 2013 | 6 | 2013 |
Optimization and effect of process parameters on tool wear in turning of titanium alloy under different lubricant conditions MV Ramana, AV Vishnu, GVSGKM Rao, DH Rao International Conference on Materials Processing and Characterization …, 2012 | 6 | 2012 |