Dr. Mithun V Kulkarni
Dr. Mithun V Kulkarni
Lecturer
Verified email at sct.edu.om - Homepage
Title
Cited by
Cited by
Year
Effects of electroplating on the mechanical properties of injection molded thermoplastics
MV Kulkarni, K Elangovan, RK Hemachandra
International Journal of Plastics Technology 17 (2), 163-170, 2013
152013
Tribological behaviours of ABS and PA6 polymermetal sliding combinations under dry friction, water absorbed and electroplated conditions
MV Kulkarni, K Elangovan, KH Reddy, SJ Basappa
J. Eng. Sci. Technol 11, 68-84, 2016
82016
Development of electroplating setup for plating ABS plastics
M Kulkarni, K Elangovan, KH Reddy
i-Manager's Journal on Mechanical Engineering 2 (3), 53, 2012
72012
Severe Plastic Deformation - A Review
BSB R.N. Harsha, Mithun V Kulkarni
Materials Today: Proceedings 5 (10, Part 3), 22340-22349, 2018
52018
SELECTIVE LASER SINTERING PROCESS –A REVIEW
MVK Rajesh R, Sudheer S
INTERNATIONAL JOURNAL OF CURRENT ENGINEERING AND SCIENTIFIC RESEARCH 2 (10 …, 2015
52015
Improvements in impact resistance property of metal plated abs and Nylon6 thermoplastics
MV Kulkarni, K Elangovan, K Hemachandra Reddy
FS J Engg Res 1 (1), 31-33, 2012
52012
Development of electroplating process for plating polyamides
MV Kulkarni, K Elangovan, KH Reddy
Bangladesh Journal of Scientific and Industrial Research 48 (3), 205-212, 2013
42013
Effects of electroplating on the mechanical properties of FDM-PLA parts
TVN Kumar, M Kulkarni, M Ravuri, K Elangovan, S Kannan
i-Manager's Journal on Future Engineering and Technology 10 (3), 29, 2015
32015
Evaluation of microstructure and mechanical properties of multi axial forged lm2 aluminum alloy
SS Sajjan, MV Kulkarni, S Ramesh, PC Sharath, R Sangamesh, A Kumar, ...
Materials Science Forum 969, 297-302, 2019
22019
Enhancement of Impact resistance property of Nylon6 by the addition of Casio^ sub 3^ as a filler material
MV Kulkarni, K Elangovan, HK Reddy, JN Prakash
International Journal of Applied Engineering Research 2 (2), 343, 2011
22011
Mechanical and Microstructural Properties of Multi-Axially Forged LM6 Aluminium Alloy
RRVK Sudheer S. Sajjan, Mithun V. Kulkarni, S. Ramesh, P. C. Sharath
Advances in Manufacturing Technology, 131-139, 2019
12019
Influence of Laser Scan Speed on Bronze Nickel Alloy Produced by Direct Metal Laser Sintering Technique
R Rajesh, MV Kulkarni
Journal of Advanced Microscopy Research 13 (2), 176-180, 2018
12018
Flexural and Hardness testing on ABS and Glass fiber reinforced Nylon6.
KHR MITHUN V KULKARNI, K ELANGOVAN
New trends in Mechanical Engineering -2011, 44-47, 2011
12011
Effect of Mechanical properties on Multi Axially Forged LM4 Aluminium Alloy
SS Sajjan, MV Kulkarni, S Ramesh, PC Sharath, V Kumar, S Rajole
Materials Today: Proceedings 24, 1462-1467, 2020
2020
STUDY ON THE ADDITION OF CALCIUM SILICATE TO POLYMER MATRIX AFFECTING THE TENSILE PROPERTY
MV KULKARNI, K ELANGOVAN, KH REDDY, P SAMPATHKUMARAN, ...
Journal of Basic and Applied Research International, 74-80, 2015
2015
Tribological Behaviours of CaSiO3 Reinforced Polyamide 6 Polymer–Metal Sliding Combinations Under Dry Friction Conditions
HS Mithun.V.Kulkarni, K Elangovan, K Hemachandra reddy, Mohan Poojari
Advanced Materials Manufacturing & Characterization 5 (1), 142 – 147, 2015
2015
Tribological Behaviors of ABS Polymer – Metal Sliding Combinations under Dry Friction and Electroplated Conditions
MVK Pradeep, Manjunath K T, Aruna B N
National Conference in MECHANICAL ENGINEERING, 15, 2014
2014
FLEXURAL PROPERTIES OF CALCIUM META SILICATE REINFORCED POLYAMIDES
MV Kulkarni, K Elangovan, KH Reddy, AS Bhide
2013
Assessment Of The Effect of Electroplating On The Mechanical Properties of Calcium Metasilicate Reinforced Nylon6 Composites.
KHR MITHUN V KULKARNI, K ELANGOVAN
Mechanica Confab 1 (3), 2-6, 2012
2012
Investigations of The Influence of Filler On The Impact Properties of Polyamides And Its Composites.
KHR MITHUN V KULKARNI, K ELANGOVAN
i-manager’s Journal on Mechanical Engineering 1 (4), 1-6, 2011
2011
The system can't perform the operation now. Try again later.
Articles 1–20