| Finite element analysis of the tower crane I Gerdemeli, S Kurt, O Deliktas 14th International Research/Expert Conference, 561-564, 2010 | 13 | 2010 |
| Fatigue life analysis of wire rope strands with finite element method I Gerdemeli, S Kurt, AS Anil Key engineering materials 572, 513-516, 2014 | 11 | 2014 |
| Analysis with finite element method of wire rope I Gerdemeli, S Kurt, AS Anil Machines, Technologies, Materials: Int. Virtual Journal, 2012 | 11 | 2012 |
| Design and finite element analysis of gantry crane I Gerdemeli, S Kurt Key Engineering Materials 572, 517-520, 2014 | 8 | 2014 |
| Analysis of belt conveyor using finite element method S Kurt, I Gerdemeli, C Cengiz Sci. Proc. Int. Congr. Mach. Technol. Mater 2, 111-113, 2012 | 7 | 2012 |
| Main Girder Beam Design And Finite Element Analysis Of 2x160 Ton Gantry Crane I Gerdemeli, S Kurt, HO Alkan 14th International Research/Expert Conference Trends in the Development of …, 2010 | 6 | 2010 |
| Design and analysis with finite element method of jib crane I Gerdemeli, S Kurt, B Tasdemir Mech. Eng. Istanbul Techn. Univ. Turkey 2 (1), 565-568, 2012 | 5 | 2012 |
| Calculations, modeling and analysis with finite element method of rubber tyred container stacking crane I Gerdemeli, S Kurt, M Yildirim 14th Int. Research/Expert Conf. Trends in the Development of Machinery and …, 2010 | 5 | 2010 |
| Numerical and FEM Investigation on Dynamic Response of Damaged Cantilever Structures Carrying Transit Load CO Bulut, S Jena, Shakti P. ,Kurt International Review of Mechanical Engineering (I.RE.M.E.) 14 (11), 699-707, 2020 | 3 | 2020 |
| Bir jib krenin deneysel gerilme analizi A Candaş Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, Yüksek Lisans Tezi, 2013 | 3 | 2013 |
| Design and analysis with numerical method of gantry crane main beam I Gerdemeli, G Akgun, S Kurt International Conference on Innovative Technologies, IN-TECH, 2013 | 3 | 2013 |
| Main girder beam design and finite element analysis of 2/160 gantry crane I Gerdemeli, S Kurt, HO Alkan 14th International Research/Expert Conference, Trends In The Development Of …, 2010 | 3 | 2010 |
| Effect of Different Types of Electric Drive Units on the Energy Consumption of Heavy Commercial Electric Vehicles M Yildirim, S Kurt World Electric Vehicle Journal 13 (5), 92, 2022 | 2 | 2022 |
| Belt Conveyor Design and Analysis İ Gerdemeli, S Kurt, ET Dayan Machines. Technologies. Materials. 8 (11), 52-55, 2014 | 2 | 2014 |
| An Experimental Stress Analysis of a Jib Crane A Candas, S Kurt, İ Gerdemeli, E Kayaoglu Key Engineering Materials 572, 173-176, 2014 | 1 | 2014 |
| Lastik Tekerlekli Konteyner İstifleme Kreninin Hesapları, Modellenmesi Ve Sonlu Elemanlar Yöntemi İle Analizi M Yıldırım Fen Bilimleri Enstitüsü, İstanbul Teknik Üniversitesi, Yüksek Lisans Tezi, 2010 | 1 | 2010 |
| Experimental and computational study on dynamic analysis of cracked simply supported structures under moving mass CO Bulut, SP Jena, S Kurt Frattura ed Integrità Strutturale 60 ((2022)), 114-133, 2022 | | 2022 |
| HAREKETLİ YÜKLERE MARUZ ÇATLAKLI YAPILARIN DİNAMİK ANALİZİ CO Bulut İSTANBUL TEKNİK ÜNİVERSİTESİ Lisansüstü Eğitim Enstitüsü, Doktora Tezi, 2021 | | 2021 |
| HAREKETLİ YÜKLERE MARUZ ÇATLAKLI YAPILARIN DİNAMİK ANALİZİ CO BULUT İSTANBUL TEKNİK ÜNİVERSİTESİ Lisansüstü Eğitim Enstitüsü, Doktora Tezi, 2021 | | 2021 |
| Güç Aktarma Organlarında Geometrik Toleranslandırma ve Radyal/Eksenel Toleransların Değerlendirilmesi D Bilican, S Kurt 1. Marmara Bölgesi Makina İmalat Sanayi Yerel Sempozyumu ve Sergisi, 2021 | | 2021 |
Adem CandaşIstanbul Technical University, Faculty of Mechanical EngineeringVerified email at itu.edu.tr
