Temperature effect on the material removal mechanism of soft-brittle crystals at nano/micron scale Q Liu, Z Liao, D Axinte International Journal of Machine Tools and Manufacture 159, 103620, 2020 | 84 | 2020 |
Formation mechanism of a smooth, defect-free surface of fused silica optics using rapid CO2 laser polishing L Zhao, J Cheng, M Chen, X Yuan, W Liao, Q Liu, H Yang, H Wang International Journal of Extreme Manufacturing 1 (3), 035001, 2019 | 64 | 2019 |
Mechanism of chip formation and surface-defects in orthogonal cutting of soft-brittle potassium dihydrogen phosphate crystals Q Liu, Z Liao, J Cheng, D Xu, M Chen Materials & Design 198, 109327, 2021 | 45 | 2021 |
Optimization of morphological parameters for mitigation pits on rear KDP surface: experiments and numerical modeling H Yang, J Cheng, M Chen, J Wang, Z Liu, C An, Y Zheng, K Hu, Q Liu Optics Express 25 (15), 18332-18345, 2017 | 30 | 2017 |
Dynamic behavior modeling of laser-induced damage initiated by surface defects on KDP crystals under nanosecond laser irradiation H Yang, J Cheng, Z Liu, Q Liu, L Zhao, J Wang, M Chen Scientific Reports 10 (1), 500, 2020 | 29 | 2020 |
Effect of tool inclination on surface quality of KDP crystal processed by micro ball-end milling Q Liu, J Cheng, Y Xiao, M Chen, H Yang, J Wang The International Journal of Advanced Manufacturing Technology 99, 2777-2788, 2018 | 29 | 2018 |
Experimental and theoretical investigation of localized CO2 laser interaction with fused silica during the process of surface damage mitigation C Tan, L Zhao, M Chen, J Cheng, C Wu, Q Liu, H Yang, Z Yin, W Liao Results in Physics 16, 102936, 2020 | 28 | 2020 |
On the improvement of the ductile removal ability of brittle KDP crystal via temperature effect Q Liu, M Chen, Z Liao, J Feng, D Xu, J Cheng Ceramics International 47 (23), 33127-33139, 2021 | 26 | 2021 |
Incident laser modulation by tool marks on micro-milled KDP crystal surface: Numerical simulation and experimental verification Q Liu, J Cheng, Z Liao, H Yang, L Zhao, M Chen Optics & Laser Technology 119, 105610, 2019 | 25 | 2019 |
Recent Advances in Laser-Induced Surface Damage of KH2PO4 Crystal M Chen, W Ding, J Cheng, H Yang, Q Liu Applied Sciences 10 (19), 6642, 2020 | 24 | 2020 |
Research on the light intensity modulation and characterizing methods of surface texture on KDP optics generated in fly-cutting and micro ball-end milling processes Q Liu, J Cheng, Z Liao, X Luo, Y Yang, M Li, H Yang, C Tan, G Wang, ... CIRP Journal of Manufacturing Science and Technology 41, 30-43, 2023 | 23 | 2023 |
Evaluation of mountain slope stability considering the impact of geological interfaces using discrete fractures model L Wang, W Chen, X Tan, X Tan, J Yuan, Q Liu Journal of Mountain Science 16 (9), 2184-2202, 2019 | 21 | 2019 |
Toward Little Heat-affected Area of Fused Silica Materials Using Short Pulse and High Power CO2 Laser HY Linjie Zhao, Jian Cheng, Mingjun Chen, Xiaodong Yuan, Wei Liao, Haijun ... Results in Physics, 2019 | 21 | 2019 |
Effect of surface scallop tool marks generated in micro-milling repairing process on the optical performance of potassium dihydrogen phosphate crystal J Cheng, Y Xiao, Q Liu, H Yang, L Zhao, M Chen, J Tan, W Liao, J Chen, ... Materials & Design 157, 447-456, 2018 | 19 | 2018 |
Characterization of manufacturing-induced surface scratches and their effect on laser damage resistance performance of diamond fly-cut KDP crystal J Cheng, H Yang, Q Liu, L Zhao, Z Liu, H Liu, T Wang, Y Xiao, K Hu, ... Results in Physics 15, 102753, 2019 | 17 | 2019 |
Rapid CO2 laser processing technique for fabrication of micro-optics and micro-structures on fused silica materials L Zhao, J Cheng, Z Yin, H Yang, Q Liu, C Tan, W Liao, M Chen, X Yuan Proceedings of the Institution of Mechanical Engineers, Part B: Journal of …, 2022 | 16 | 2022 |
Effect of milling modes on surface integrity of KDP crystal processed by micro ball-end milling Q Liu, J Cheng, Y Xiao, H Yang, M Chen Procedia CIRP 71, 260-266, 2018 | 15 | 2018 |
Comparison and correlation between the laboratory, semi-theoretical and empirical methods in predicting the field excavation performance of tunnel boring machine (TBM) Y Pan, Q Liu, Q Liu, Y Bo, J Liu, X Peng, T Cai Acta Geotechnica 17 (2), 653-676, 2022 | 14 | 2022 |
Modeling of residual tool mark formation and its influence on the optical performance of KH2PO4 optics repaired by micro-milling Q Liu, J Cheng, H Yang, Y Xu, L Zhao, C Tan, M Chen Optical Materials Express 9 (9), 3789-3807, 2019 | 13 | 2019 |
Formation mechanism of surface morphology in the process of CO2 pulsed laser processing of fused silica optics C Tan, L Zhao, M Chen, J Cheng, H Yang, Q Liu, Z Yin, W Liao Optics & Laser Technology 138, 106838, 2021 | 12 | 2021 |