| Current state of Fe-Mn-Al-C low density steels S Chen, R Rana, A Haldar, RK Ray Progress in Materials Science 89, 345-391, 2017 | 512 | 2017 |
| Strain induced precipitation of complex carbonitrides in Nb–V and Ti–V microalloyed steels A Pandit, A Murugaiyan, AS Podder, A Haldar, D Bhattacharjee, ... Scripta materialia 53 (11), 1309-1314, 2005 | 125 | 2005 |
| Experimental evaluation and constitutive modeling of non-proportional deformation for asymmetric steels RK Verma, T Kuwabara, K Chung, A Haldar International journal of plasticity 27 (1), 82-101, 2011 | 111 | 2011 |
| Design and development of precipitate strengthened advanced high strength steel for automotive application G Jha, S Das, S Sinha, A Lodh, A Haldar Materials Science and Engineering: A 561, 394-402, 2013 | 84 | 2013 |
| Development and characterisation of C–Mn–Al–Si–Nb TRIP aided steel T Bhattacharyya, SB Singh, S Das, A Haldar, D Bhattacharjee Materials Science and Engineering: A 528 (6), 2394-2400, 2011 | 83 | 2011 |
| Effect of normal anisotropy on springback RK Verma, A Haldar Journal of Materials Processing Technology 190 (1-3), 300-304, 2007 | 83 | 2007 |
| Texture in Steels A Haldar, S Suwas, DM Bhattacharjee Springer, New York, NY, 2009 | 73 | 2009 |
| Analysis of texture and R value variations in asymmetric rolling of IF steel LS Tóth, B Beausir, D Orlov, R Lapovok, A Haldar Journal of Materials Processing Technology 212 (2), 509-515, 2012 | 57 | 2012 |
| Development of multiphase microstructure with bainite, martensite, and retained austenite in a Co-containing steel through quenching and partitioning (Q&P) treatment S Samanta, S Das, D Chakrabarti, I Samajdar, SB Singh, A Haldar Metallurgical and Materials Transactions A 44, 5653-5664, 2013 | 51 | 2013 |
| Microstructural and textural development in an extra low carbon steel during warm rolling A Haldar, RK Ray Materials Science and Engineering: A 391 (1-2), 402-407, 2005 | 48 | 2005 |
| Development of hot rolled steel sheet with 600 MPa UTS for automotive wheel application G Jha, S Das, A Lodh, A Haldar Materials science and engineering: A 552, 457-463, 2012 | 47 | 2012 |
| Asymmetric rolling of interstitial-free steel using one idle roll R Lapovok, D Orlov, IB Timokhina, A Pougis, LS Toth, PD Hodgson, ... Metallurgical and Materials Transactions A 43, 1328-1340, 2012 | 40 | 2012 |
| Continuously cooled ultrafine bainitic steel with excellent strength–elongation combination S Das, A Haldar Metallurgical and Materials Transactions A 45, 1844-1854, 2014 | 39 | 2014 |
| Grain orientation dependence of microstructures in a warm rolled IF steel A Haldar, X Huang, T Leffers, N Hansen, RK Ray Acta materialia 52 (18), 5405-5418, 2004 | 39 | 2004 |
| Evolution of crystallographic texture and microstructure during cold rolling of twinning-induced plasticity (TWIP) steel: experiments and simulations NP Gurao, P Kumar, B Bhattacharya, A Haldar, S Suwas Metallurgical and Materials Transactions A 43, 5193-5201, 2012 | 38 | 2012 |
| On the Cu precipitation behavior in thermomechanically processed low carbon microalloyed steels SK Ghosh, A Haldar, PP Chattopadhyay Materials Science and Engineering: A 519 (1-2), 88-93, 2009 | 34 | 2009 |
| Asymmetric rolling of interstitial-free steel using differential roll diameters. Part I: mechanical properties and deformation textures D Orlov, A Pougis, R Lapovok, LS Toth, IB Timokhina, PD Hodgson, ... Metallurgical and Materials Transactions A 44, 4346-4359, 2013 | 33 | 2013 |
| Prediction of hardness of the tempered martensitic rim of TMT rebars M Mukherjee, C Dutta, A Haldar Materials Science and Engineering: A 543, 35-43, 2012 | 32 | 2012 |
| Ferrite grain size distributions in ultra-fine-grained high-strength low-alloy steel after controlled thermomechanical deformation S Patra, S Roy, V Kumar, A Haldar, D Chakrabarti Metallurgical and Materials Transactions A 42, 2575-2590, 2011 | 23 | 2011 |
| Hot-rolled and continuously cooled bainitic steel with good strength–elongation combination S Das, S Sinha, A Lodh, AR Chintha, M Krugla, A Haldar Materials Science and Technology 33 (8), 1026-1037, 2017 | 22 | 2017 |
