Ongoing Challenges of Laser-Based Powder Bed Fusion Processing of Al Alloys and Potential Solutions from the Literature—A Review A Martucci, A Aversa, M Lombardi Materials 16 (3), 1084, 2023 | 22 | 2023 |
Synergic strategies to improve the PBF-LB\M processability of a cracking-sensitive alloy A Martucci, A Aversa, F Bondioli, P Fino, M Lombardi Materials & Design 224, 111396, 2022 | 15 | 2022 |
Low-Power Laser Powder Bed Fusion Processing of Scalmalloy® A Martucci, A Aversa, D Manfredi, F Bondioli, S Biamino, D Ugues, ... Materials 15 (9), 3123, 2022 | 9 | 2022 |
An Automatic on Top Analysis of Single Scan Tracks to Evaluate the Laser Powder Bed Fusion Building Parameters A Martucci, F Marinucci, A Sivo, A Aversa, D Manfredi, F Bondioli, P Fino, ... Materials 14 (18), 5171, 2021 | 5 | 2021 |
Effects of Stress-Relieving Temperature on Residual Stresses, Microstructure and Mechanical Behaviour of Inconel 625 Processed by PBF-LB/M A Martucci, G Marchese, E Bassini, M Lombardi Metals 13 (4), 796, 2023 | 4 | 2023 |
The effect of PBF‐LB/M powder reuse on the surface chemical composition of the Scalmalloy powder A Martucci, PL Tam, A Aversa, M Lombardi, L Nyborg Surface and Interface Analysis, 2022 | 4* | 2022 |
The Influence of Processing Parameters on the Al-Mn Enriched Nano-Precipitates Formation in a Novel Al-Mn-Cr-Zr Alloy Tailored for Power Bed Fusion-Laser Beam Process A Martucci, B Mehta, M Lombardi, L Nyborg Metals 12 (8), 1387, 2022 | 3 | 2022 |
Improvement in the PBF-LB/M processing of the Al-Si-Cu-Mg composition through the use of pre-alloyed powder A Martucci, F Gobber, A Aversa, D Manfredi, P Fino, M Lombardi Materials Research Express 10 (4), 046508, 2023 | 2 | 2023 |
Effect of Cu Content on the PBF-LB/M Processing of the Promising Al-Si-Cu-Mg Composition A Martucci, E Bassini, M Lombardi Metals 13 (7), 1315, 2023 | 1 | 2023 |
Deciphering Microstructures and Phases of Gas-Atomised Novel Al-Fe-Si-Cr-Ni Alloys B Bhatt, A Martucci, E Virgillito, F Gobber, F Bondioli, D Manfredi, ... Metals 14 (1), 17, 2023 | | 2023 |
Development and characterisation of Al-based alloys processed by PBF-LB/M A Martucci Politecnico di Torino, 2023 | | 2023 |
A Time-saving Empirical Strategy For The Geometrical Optimisation Of Support Structures Validated On AlSi10Mg And IN625 Alloys A Martucci, G Marchese, A Aversa, D Manfredi, S Biamino, D Ugues, ... Euro PM2023 - Session 39 : AM Beam Based Technologies - AM Powders and …, 2023 | | 2023 |
Monitoraggio dei processi di saldatura attraverso sistemi di indagine non distruttivi= Non-destructive testing of welded joints A Martucci Politecnico di Torino, 2019 | | 2019 |