Christian Carloni
Christian Carloni
Associate Professor - Case Western Reserve University
Verified email at
Cited by
Cited by
Matrix–fiber bond behavior in PBO FRCM composites: A fracture mechanics approach
T D’Antino, C Carloni, LH Sneed, C Pellegrino
Engineering Fracture Mechanics 117, 94-111, 2014
Width effect in the interface fracture during shear debonding of FRP sheets from concrete
KV Subramaniam, C Carloni, L Nobile
Engineering Fracture Mechanics 74 (4), 578-594, 2007
Experimental determination of FRP–concrete cohesive interface properties under fatigue loading
C Carloni, KV Subramaniam, M Savoia, C Mazzotti
Composite Structures 94 (4), 1288-1296, 2012
Flexural behavior of RC beams strengthened with steel-FRCM composite
LH Sneed, S Verre, C Carloni, L Ombres
Engineering Structures 127, 686-699, 2016
A comparison of the bond behavior of PBO-FRCM composites determined by double-lap and single-lap shear tests
LH Sneed, T D'Antino, C Carloni, C Pellegrino
Cement and Concrete Composites 64, 37-48, 2015
Investigation of sub-critical fatigue crack growth in FRP/concrete cohesive interface using digital image analysis
C Carloni, KV Subramaniam
Composites Part B: Engineering 51, 35-43, 2013
Role of the matrix layers in the stress-transfer mechanism of FRCM composites bonded to a concrete substrate
C Carloni, T D’Antino, LH Sneed, C Pellegrino
Journal of Engineering Mechanics 141 (6), 04014165, 2015
Direct determination of cohesive stress transfer during debonding of FRP from concrete
C Carloni, KV Subramaniam
Composite Structures 93 (1), 184-192, 2010
Investigation of bond behavior of PBO fiber-reinforced cementitious matrix composite-concrete interface
LH Sneed, T D’Antino, C Carloni
ACI Mater J 111 (5), 569-580, 2014
FRP-masonry debonding: numerical and experimental study of the role of mortar joints
C Carloni, KV Subramaniam
Journal of composites for construction 16 (5), 581-589, 2012
Influence of the substrate characteristics on the bond behavior of PBO FRCM-concrete joints
T D’Antino, LH Sneed, C Carloni, C Pellegrino
Construction and Building Materials 101, 838-850, 2015
Torsional behavior of RC beams strengthened with PBO-FRCM composite–An experimental study
MY Alabdulhady, LH Sneed, C Carloni
Engineering Structures 136, 393-405, 2017
Fracture analysis for orthotropic cracked plates
L Nobile, C Carloni
Composite Structures 68 (3), 285-293, 2005
Flexural behaviour of RC members strengthened with FRCM: State-of-the-art and predictive formulas
F Bencardino, C Carloni, A Condello, F Focacci, A Napoli, R Realfonzo
Composites Part B: Engineering 148, 132-148, 2018
Steel fiber reinforced geopolymer matrix (S-FRGM) composites applied to reinforced concrete structures for strengthening applications: A preliminary study
L Carabba, M Santandrea, C Carloni, S Manzi, MC Bignozzi
Composites Part B: Engineering 128, 83-90, 2017
Effect of the inherent eccentricity in single-lap direct-shear tests of PBO FRCM-concrete joints
T D’Antino, LH Sneed, C Carloni, C Pellegrino
Composite Structures 142, 117-129, 2016
An understanding of the width effect in FRP–concrete debonding
KV Subramaniam, C Carloni, L Nobile
Strain 47 (2), 127-137, 2011
FRP-masonry interfacial debonding: An energy balance approach to determine the influence of the mortar joints
C Carloni, F Focacci
European Journal of Mechanics-A/Solids 55, 122-133, 2016
An indirect method to calibrate the interfacial cohesive material law for FRCM-concrete joints
F Focacci, T D'Antino, C Carloni, LH Sneed, C Pellegrino
Materials & Design 128, 206-217, 2017
Loading rate effect on the debonding phenomenon in fiber reinforced cementitious matrix-concrete joints
C Carloni, S Verre, LH Sneed, L Ombres
Composites Part B: Engineering 108, 301-314, 2017
The system can't perform the operation now. Try again later.
Articles 1–20