Effect of intermetallic phases on corrosion behavior and mechanical properties of duplex stainless steel and super-duplex stainless steel P Paulraj, R Garg Advances in Science and Technology Research Journal 9 (27), 87--105, 2015 | 74 | 2015 |
Hydrogen induced cracking of pipeline and pressure vessel steels: A review G Ghosh, P Rostron, R Garg, A Panday Engineering Fracture Mechanics 199, 609-618, 2018 | 54 | 2018 |
Effect of welding parameters on pitting behavior of GTAW of DSS and super DSS weldments P Paulraj, R Garg Engineering Science and Technology, an International Journal 19 (2), 1076-1083, 2016 | 47 | 2016 |
Effect of welding parameters on pitting behavior of GTAW of DSS and super DSS weldments P Paulraj, R Garg Engineering Science and Technology, an International Journal 19 (2), 1076-1083, 2016 | 47 | 2016 |
Effect of load on friction and wear characteristics of Jatropha oil bio-lubricants Y Singh, R Garg, S Kumar Biofuels 8 (1), 125-133, 2017 | 20 | 2017 |
RETRACTED ARTICLE: Tribological behavior of pongamia oil as a lubricant additive Y Singh, R Garg, A Kumar Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 38 …, 2016 | 17 | 2016 |
Comparative tribological investigation on EN31 with pongamia and jatropha as lubricant additives Y Singh, R Garg, S Kumar Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 38 …, 2016 | 13 | 2016 |
Effect of welding parameters on mechanical properties of GTAW of UNS S31803 and UNS S32750 weldments P Paulraj, R Garg Manufacturing review 2, 29, 2015 | 12 | 2015 |
ZDDP-An inevitable lubricant additive for engine oils I Mahdi, R Garg, A Srivastav International Journal of Engineering Inventions 1 (1), 47-48, 2012 | 12 | 2012 |
A study on the development and wear characteristics of rheocast Al–5Cu–2Pb alloy and Al–5Cu/Pb–18Sn wire composites V Agarwala, KG Satyanarayana, RC Agarwala, R Garg Materials Science and Engineering: A 327 (2), 186-202, 2002 | 12 | 2002 |
RETRACTED ARTICLE: Effect of sliding speed and temperature on the tribological behavior of pongamia oil-based blended lubricant Y Singh, R Garg, S Kumar Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 41 …, 2019 | 11 | 2019 |
Aspects of non-edible vegetable oil-based bio-lubricants in the automotive sector Y Singh, R Garg, S Kumar Green 5 (1-6), 59-72, 2015 | 11 | 2015 |
A study on Ni-P and Ni-P-ZnO composite coatings developed by electroless technique S Sharma, S Sharma, P Agarwala, R Garg, P Gopinath Advanced Materials Research 585, 512-516, 2012 | 11 | 2012 |
RETRACTED ARTICLE: Friction and Wear Characterization of Modified Jatropha Oil (Jatropha Curcas) Using Pin on Disc Tribometer Y Singh, R Garg, S Kumar Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 44 …, 2022 | 10 | 2022 |
Microstructure and wear behavior of Al-Al2O3in situ composites fabricated by the reaction of V2O5 particles in pure aluminum A Singla, R Garg, M Saxena Green Processing and Synthesis 4 (6), 487-497, 2015 | 8 | 2015 |
Experimental study of the performance and emission of diesel engine fueled with blends of diesel–ethanol as an alternative fuel SK Kurre, S Pandey, R Garg, M Saxena Biofuels 6 (3-4), 209-216, 2015 | 8 | 2015 |
Effect of heat treatment on microstructure and tensile properties of A356/V2O5 insitu composites A Singla, R Garg, M Saxena International Journal of Manufacturing, Materials, and Mechanical …, 2016 | 5 | 2016 |
Optimization of tribological behavior of Pongamia oil blends as an engine lubricant additive Y Singh, R Garg, S Kumar Green Processing and Synthesis 4 (5), 421-431, 2015 | 5 | 2015 |
Condition monitoring of a diesel engine fueled with a blend of diesel, biodiesel, and butanol using engine oil analysis SK Kurre, S Pandey, R Garg, M Saxena Biofuels 6 (3-4), 223-231, 2015 | 5 | 2015 |
The effect of heat treatment of TiO2 nanoparticles on photovoltaic performance of fabricated DSSCs P Agarwala, P Makkar, S Sharma, R Garg Journal of materials engineering and performance 23 (10), 3703-3709, 2014 | 4 | 2014 |