Follow
Suhrit Mula
Suhrit Mula
Indian Institute of Technolgy Roorkee
Verified email at iitr.ac.in - Homepage
Title
Cited by
Cited by
Year
On structure and mechanical properties of ultrasonically cast Al–2% Al2O3 nanocomposite
S Mula, P Padhi, SC Panigrahi, SK Pabi, S Ghosh
Materials Research Bulletin 44 (5), 1154-1160, 2009
1442009
Effect of stacking fault energy on deformation behavior of cryo-rolled copper and copper alloys
H Bahmanpour, A Kauffmann, MS Khoshkhoo, KM Youssef, S Mula, ...
Materials Science and Engineering: A 529, 230-236, 2011
862011
Simultaneous improvement of mechanical strength, ductility and corrosion resistance of stir cast Al7075-2% SiC micro-and nanocomposites by friction stir processing
A Kumar, K Pal, S Mula
Journal of Manufacturing Processes 30, 1-13, 2017
592017
Structure and mechanical properties of Al–Ni–Ti amorphous powder consolidated by pressure-less, pressure-assisted and spark plasma sintering
S Mula, K Mondal, S Ghosh, SK Pabi
Materials Science and Engineering: A 527 (16-17), 3757-3763, 2010
582010
Thermomechanical processing of low carbon Nb–Ti stabilized microalloyed steel: microstructure and mechanical properties
S Ghosh, S Mula
Materials Science and Engineering: A 646, 218-233, 2015
512015
Mechanical properties and electrical conductivity of Cu–Cr and Cu–Cr–4% SiC nanocomposites for thermo-electric applications
S Mula, P Sahani, SK Pratihar, S Mal, CC Koch
Materials Science and Engineering: A 528 (13-14), 4348-4356, 2011
452011
Enhancement of mechanical properties of low stacking fault energy brass processed by cryorolling followed by short-annealing
R Kumar, SM Dasharath, PC Kang, CC Koch, S Mula
Materials & Design 67, 637-643, 2015
442015
Structural investigation of vacuum sintered Cu–Cr and Cu–Cr–4% SiC nanocomposites prepared by mechanical alloying
P Sahani, S Mula, PK Roy, PC Kang, CC Koch
Materials Science and Engineering: A 528 (25-26), 7781-7789, 2011
432011
Thermodynamic feasibility of solid solubility extension of Nb in Cu and their thermal stability
S Mula, H Bahmanpour, S Mal, PC Kang, M Atwater, W Jian, ...
Materials Science and Engineering: A 539, 330-336, 2012
412012
Oxidation protection of carbon fibers by a reaction sintered nanostructured SiC coating
PC Kang, GQ Chen, B Zhang, GH Wu, S Mula, CC Koch
Surface and Coatings Technology 206 (2-3), 305-311, 2011
412011
Effect of critical temperatures on microstructures and mechanical properties of Nb–Ti stabilized IF steel processed by multiaxial forging
S Ghosh, AK Singh, S Mula
Materials & Design 100, 47-57, 2016
322016
Simultaneous improvement of strength, ductility and corrosion resistance of Al2024 alloy processed by cryoforging followed by ageing
AK Singh, S Ghosh, S Mula
Materials Science and Engineering: A 651, 774-785, 2016
322016
Effect of process parameters on microstructural evolution, mechanical properties and corrosion behavior of friction stir processed Al 7075 alloy
A Kumar, SK Sharma, K Pal, S Mula
Journal of Materials Engineering and Performance 26 (3), 1122-1134, 2017
282017
Effect of zirconium on thermal stability of nanocrystalline aluminium alloy prepared by mechanical alloying
VMS Muthaiah, S Mula
Journal of Alloys and Compounds 688, 571-580, 2016
272016
Mechanical properties, formability and corrosion resistance of thermomechanically controlled processed Ti-Nb stabilized IF steel
S Ghosh, AK Singh, S Mula, P Chanda, VV Mahashabde, TK Roy
Materials Science and Engineering: A 684, 22-36, 2017
262017
Effect of microwave sintering over vacuum and conventional sintering of Cu based nanocomposites
S Mula, J Panigrahi, CC Koch
Journal of alloys and compounds 588, 710-715, 2014
262014
Mechanical properties and fracture mechanisms of ultrafine grained Cu-9.6% Zn alloy processed by multiaxial cryoforging
SM Dasharath, S Mula
Materials Science and Engineering: A 675, 403-414, 2016
252016
Microstructural evolution and mechanical properties of low SFE Cu-Al alloys processed by cryorolling followed by short-annealing
SM Dasharath, S Mula
Materials & Design 99, 552-564, 2016
242016
Structural evolution of Cu(1X)YX alloys prepared by mechanical alloying: Their thermal stability and mechanical properties
S Mula, D Setman, K Youssef, RO Scattergood, CC Koch
Journal of Alloys and Compounds 627, 108-116, 2015
232015
Workability and mechanical properties of ultrasonically cast Al–Al2O3 nanocomposites
S Mula, SK Pabi, CC Koch, P Padhi, S Ghosh
Materials Science and Engineering: A 558, 485-491, 2012
222012
The system can't perform the operation now. Try again later.
Articles 1–20