Laser surface modification of low carbon borided steels P Gopalakrishnan, P Shankar, RVS Rao, M Sundar, SS Ramakrishnan Scripta Materialia 44 (5), 707-712, 2001 | 106 | 2001 |
Diffusion-modified boride interlayers for chemical vapour deposition of low-residual-stress diamond films on steel substrates JG Buijnsters, P Shankar, P Gopalakrishnan, WJP Van Enckevort, ... Thin Solid Films 426 (1-2), 85-93, 2003 | 77 | 2003 |
Enhancing the mechanical, wear and corrosion behaviour of stir casted aluminium 6061 hybrid composites through the incorporation of boron nitride and aluminium oxide particles S Gopinath, M Prince, GR Raghav Materials Research Express 7 (1), 016582, 2020 | 46 | 2020 |
Morphological studies on the development of chemical conversion coating on surface of Mg–4Zn alloy and its corrosion and bio mineralisation behaviour in simulated body fluid DB Prabhu, P Gopalakrishnan, KR Ravi Journal of Alloys and Compounds 812, 152146, 2020 | 46 | 2020 |
Elucidating the role of microstructural modification on stress corrosion cracking of biodegradable Mg4Zn alloy in simulated body fluid DB Prabhu, J Nampoothiri, V Elakkiya, R Narmadha, R Selvakumar, ... Materials Science and Engineering: C 106, 110164, 2020 | 32 | 2020 |
Stress corrosion cracking of biodegradable Mg-4Zn alloy in simulated body fluid at different strain rates–A fractographic investigation DB Prabhu, S Dhamotharan, G Sathishkumar, P Gopalakrishnan, KR Ravi Materials Science and Engineering: A 730, 223-231, 2018 | 29 | 2018 |
Coatings on implants: study on similarities and differences between the PCL coatings for Mg based lab coupons and final components DB Prabhu, P Gopalakrishnan, KR Ravi Materials & Design 135, 397-410, 2017 | 21 | 2017 |
Experimental investigations on the effects of multicomponent laser boriding on steels M Prince, SL Arjun, GS Raj, P Gopalakrishnan Materials Today: Proceedings 5 (11), 25276-25284, 2018 | 19 | 2018 |
Improvement in wear and corrosion resistance of AISI 1020 steel by high velocity oxy-fuel spray coating containing Ni-Cr-B-Si-Fe-C M Prince, AJ Thanu, P Gopalakrishnan De Gruyter 31 (2), 149-155, 2012 | 19 | 2012 |
Fracture Microindentation on boride layers on AISI 1020 steel M Prince, AJ Thanu, SL Arjun, U Velmurugan, P Gopalakrishnan IOP Conference Series: Materials Science and Engineering 114 (1), 012105, 2016 | 9 | 2016 |
Effects of pack boriding and induction boriding on the dry sliding wear behavior of high speed steel SV Kumar, GS Raj, M Prince Materials Today: Proceedings 59, 1105-1110, 2022 | 8 | 2022 |
Effect of the reinforcement phase on indentation resistance and damage characterization of glass/epoxy laminates using acoustic emission monitoring CS Kumar, K Saravanakumar, P Prathap, M Prince, G Bharathiraja, ... Advances in Materials Science and Engineering 2021, 1-11, 2021 | 7 | 2021 |
Induction surface modification of borided AISI 4340 steel T Sivakumar, M Prince, P Gopalakrishnan International Journal of Applied Engineering Research 9 (22), 17425-32, 2014 | 7 | 2014 |
Some refinements to boriding processes P Gopalakrishnan, SS Ramakrishnan Bharathiar University, 2000 | 7 | 2000 |
Toughness study of Borided, Borided and induction modified AISI 4340 steel T Sivakumar, M Prince, P Gopalakrishnan IOP Conference Series: Materials Science and Engineering 764 (1), 012022, 2020 | 6 | 2020 |
Laser Surface Alloying of Nickel and Chromium (III) Electroplated Carbon Steel with Nd: YAG Laser M Prince, P Gopalakrishnan, G Bhuvanashekaran High Temperature Materials and Processes 29 (4), 313-324, 2010 | 6 | 2010 |
Solidification Analysis of Mg–4Zn–xSr System to Study Phase Transformations in Mg-Rich Corner DB Prabhu, C Muthuraja, J Nampoothiri, P Gopalakrishnan, KR Ravi Transactions of the Indian Institute of Metals 71, 2801-2806, 2018 | 5 | 2018 |
Some studies on laser boriding of nickel and chromium electroplated AISI 1020 steel M Prince Chennai, 2014 | 5 | 2014 |
BORIDING OF STEELS: IMPROVEMENT OF MECHANICAL PROPERTIES-A REVIEW M Prince, GS Raj, DY Kumar, P Gopalakrishnan High Temperature Material Processes: An International Quarterly of High …, 2022 | 4 | 2022 |
Effect of Hybridization, manufacturing methods and factors influencing natural fibers reinforced composites and its commercial applications–A review M Prince, S Gopinath, J Thanu, GS Raj, AP Kumar Materials Today: Proceedings 62, 2297-2302, 2022 | 4 | 2022 |