Effect of cyclic heat treatment on microstructure and mechanical properties of 0.6 wt% carbon steel A Saha, DK Mondal, J Maity Materials Science and Engineering: A 527 (16), 4001-4007, 2010 | 107 | 2010 |
Microstructural modifications and changes in mechanical properties during cyclic heat treatment of 0.16% carbon steel A Saha, DK Mondal, K Biswas, J Maity Materials Science and Engineering: A 534, 465-475, 2012 | 61 | 2012 |
Development of high strength ductile hypereutectoid steel by cyclic heat treatment process A Saha, DK Mondal, K Biswas, J Maity Materials Science and Engineering: A 541, 204-215, 2012 | 47 | 2012 |
An Alternate Approach to Accelerated Spheroidization in Steel by Cyclic Annealing A Saha, DK Mondal, J Maity Journal of Materials Engineering and Performance 20 (1), 114-119, 2011 | 45 | 2011 |
Failure investigation of a secondary super heater tube in a 140 MW thermal power plant A Saha, H Roy Case studies in engineering failure analysis 8, 57-60, 2017 | 34 | 2017 |
Mechanism of accelerated spheroidization of steel during cyclic heat treatment around the upper critical temperature J Maity, A Saha, DK Mondal, K Biswas Philosophical Magazine Letters 93 (4), 231-237, 2013 | 31 | 2013 |
Failure Investigation of a Final Super Heater Tube in a 140 MW Thermal Power Plant A Saha, H Roy, AK Shukla Journal of Failure Analysis and Prevention 15 (2), 184-189, 2015 | 15 | 2015 |
Investigation into the probable cause of failure of economizer tube of a thermal power plant A Saha, H Roy, AK Shukla Journal of Failure Analysis and Prevention 10 (3), 187-190, 2010 | 14 | 2010 |
Failure investigation of Platen Superheater Outlet Header H Roy, D Ghosh, P Roy, A Saha, AK Shukla, J Basu Journal for Manufacturing Science and Production 10 (1), 17-24, 2009 | 14 | 2009 |
Boiler tube failures – Some case studies A Saha Handbook of Materials Failure Analysis with Case Studies from the Chemicals …, 2016 | 13 | 2016 |
Failure of a Secondary Superheater Tube in a 140-MW Thermal Power Plant A Saha, AK Shukla Journal of Failure Analysis and Prevention 14 (1), 10-12, 2014 | 13 | 2014 |
Failure Analysis of Boiler Water Wall Tube: A Case Study from Thermal Power Plant D Ghosh, H Roy, A Saha, C Subramanian Journal of Failure Analysis and Prevention 22 (1), 203-208, 2022 | 12 | 2022 |
Development of high strength ductile eutectoid steel through cyclic heat treatment involving incomplete austenitization followed by forced air cooling A Mishra, A Saha, J Maity Materials Characterization, 2016 | 11 | 2016 |
Dry Sliding Wear Behavior of a Novel 6351 Al-Al4SiC4 Composite MK Mondal, K Biswas, A Saha, J Maity Journal of Materials Engineering and Performance 24 (2), 759-770, 2015 | 6 | 2015 |
Investigation of probable cause of damage of steam drum of naphtha cracking furnace A Saha, H Roy, S Ray, M Maiti, KK Chowdhury, AK Shukla, J Basu Engineering Failure Analysis 16 (5), 1387-1396, 2009 | 6 | 2009 |
Boiler tube failures in thermal power plant: two case studies S Kumar, P Tadge, A Mondal, N Hussain, S Ray, A Saha Materials Today: Proceedings 66, 3847-3852, 2022 | 4 | 2022 |
Microstructure Evolution in AISI 1080 Eutectoid Steel Under Cyclic Quenching Treatment A Mishra, A Saha, J Maity Metallography, Microstructure, and Analysis 4 (5), 355-370, 2015 | 3 | 2015 |
Microstructure evolution in AISI 1080 eutectoid steel under cyclic quenching Treatment ASJM Alok Mishra Metallography, Microstructure, and Analysis 4, 355-370, 2015 | 3 | 2015 |
Failure of a Pendent Reheater Tube in a 110 MW Thermal Power Plant A Saha, H Roy, AK Shukla High Temperature Materials and Processes, 1-6, 2014 | 3 | 2014 |
Failure Analysis of a New Turbine Parting Plane Stud H Roy, A Saha, D Ghosh, S Ray, AΚ Shukla Journal of the Mechanical Behavior of Materials 19 (6), 373-382, 2009 | 1 | 2009 |