Chedtha Puncreobutr
Chedtha Puncreobutr
Metallurgical Engineering Department, Chulalongkorn University
Verified email at
Cited by
Cited by
Influence of Fe-rich intermetallics on solidification defects in Al–Si–Cu alloys
C Puncreobutr, PD Lee, KM Kareh, T Connolley, JL Fife, AB Phillion
Acta Materialia 68, 42-51, 2014
In situ quantification of the nucleation and growth of Fe-rich intermetallics during Al alloy solidification
C Puncreobutr, AB Phillion, JL Fife, P Rockett, AP Horsfield, PD Lee
Acta Materialia 79, 292-303, 2014
Transgranular liquation cracking of grains in the semi-solid state
S Karagadde, PD Lee, B Cai, JL Fife, MA Azeem, KM Kareh, ...
Nature Communications 6, 8300, 2015
Coupling in situ synchrotron X-ray tomographic microscopy and numerical simulation to quantify the influence of intermetallic formation on permeability in aluminium–silicon …
C Puncreobutr, AB Phillion, JL Fife, PD Lee
Acta Materialia 64, 316–325, 2014
Quantitative 3D Characterization of Solidification Structure and Defect Evolution in Al Alloys
C Puncreobutr, PD Lee, RW Hamilton, AB Phillion
JOM Journal of the Minerals, Metals and Materials Society 64 (1), 89-95, 2012
Synchrotron Tomographic Characterization of Damage Evolution During Aluminum Alloy Solidification
C Puncreobutr, PD Lee, RW Hamilton, B Cai, T Connolley
Metallurgical and Materials Transactions A 44 (12), 5389-5395, 2013
A Patient-Matched Entire First Metacarpal Prosthesis in Treatment of Giant Cell Tumor of Bone
T Punyaratabandhu, B Lohwongwatana, C Puncreobutr, A Kosiyatrakul, ...
Case Reports in Orthopedics 2017, 2017
The behavior of gypsum-bonded investment in the gold jewelry casting process
T Phetrattanarangsi, C Puncreobutr, A Khamkongkaeo, C Thongchai, ...
Thermochimica Acta 657, 144-150, 2017
A new parameter for modelling three-dimensional damage evolution validated by synchrotron tomography
M Kaye, C Puncreobutr, PD Lee, DS Balint, T Connolley, D Farrugia, J Lin
Acta Materialia 61 (20), 7616–7623, 2013
Geometry anisotropy and mechanical property isotropy in titanium foam fabricated by replica impregnation method
A Manonukul, P Srikudvien, M Tange, C Puncreobutr
Materials Science and Engineering: A 655, 388-395, 2016
The Patient-Specific Implant Created with 3D Printing Technology in Treatment of the Irreparable Radial Head in Chronic Persistent Elbow Instability
S Luenam, A Kosiyatrakul, C Hansudewechakul, K Phakdeewisetkul, ...
Case Reports in Orthopedics 2018, 2018
Effects of post-processing on microstructure and adhesion strength of TiO2 nanotubes on 3D-printed Ti-6Al-4V alloy
D Decha-umphai, H Chunate, T Phetrattanarangsi, T Boonchuduang, ...
Surface and Coatings Technology 421, 127431, 2021
Formation of Alpha-Case Layer During Investment Casting of Pure Ti and Ti-6Al-4V Using Comparative XRD and EXAFS Investigation
T Boonchuduang, A Bootchanont, W Klysubun, P Amonpattaratkit, ...
Metallurgical and Materials Transactions A 51, 586–596, 2020
Laser-based additive manufacturing of bulk metallic glasses: Recent advances and future perspectives for biomedical applications
AAA Aliyu, C Panwisawas, J Shinjo, C Puncreobutr, RC Reed, ...
journal of materials research and technology 23, 2956-2990, 2023
Quantifying damage accumulation during the hot deformation of free-cutting steels using ultra-fast synchrotron tomography
C Puncreobutr, PD Lee, M Kaye, D Balint, D Farrugia, T Connolley, J Lin
IOP Conference Series: Materials Science and Engineering 33 (1), 012038, 2012
Understanding the Stress Distribution on Anatomic Customized Root-Analog Dental Implant at Bone-Implant Interface for Different Bone Densities
P Nimmawitt, AAA Aliyu, B Lohwongwatana, S Arunjaroensuk, ...
Materials 15 (18), 6379, 2022
Finite element analysis comparison between superior clavicle locking plate with and without screw holes above fracture zone in midshaft clavicular fracture
N Pengrung, N Lakdee, C Puncreobutr, B Lohwongwatana, ...
BMC musculoskeletal disorders 20 (1), 1-7, 2019
A novel patient-specific titanium mesh implant design for reconstruction of complex orbital fracture
P Kittichokechai, K Sirichatchai, C Puncreobutr, B Lohwongwatana, ...
Plastic and Reconstructive Surgery–Global Open 10 (1), e4081, 2022
Titania Nanotube Architectures Synthesized on 3D-Printed Ti-6Al-4V Implant and Assessing Vancomycin Release Protocols
H Chunate, J Khamwannah, AAA Aliyu, S Tantavisut, C Puncreobutr, ...
Materials 14 (21), 6576, 2021
A custom-made distal humerus plate fabricated by selective laser melting
T Thomrungpiyathan, S Luenam, B Lohwongwatana, W Sirichativapee, ...
Computer Methods in Biomechanics and Biomedical Engineering 24 (6), 585-596, 2021
The system can't perform the operation now. Try again later.
Articles 1–20