| Effectiveness of vegetable oil based nanofluids as potential cutting fluids in turning AISI 1040 steel R Padmini, PV Krishna, GKM Rao Tribology International 94, 490-501, 2016 | 283 | 2016 |
| Development of hybrid model and optimization of surface roughness in electric discharge machining using artificial neural networks and genetic algorithm G Rangajanardhaa Journal of materials processing technology 209 (3), 1512-1520, 2009 | 211 | 2009 |
| Performance evaluation of vegetable oil based nano cutting fluids in machining using grey relational analysis-A step towards sustainable manufacturing P Rapeti, VK Pasam, KMR Gurram, RS Revuru Journal of Cleaner Production 172, 2862-2875, 2018 | 164 | 2018 |
| Finite element modeling for maximum temperature in friction stir welding and its validation P Prasanna, BS Rao, GKM Rao The International Journal of Advanced Manufacturing Technology 51 (9), 925-933, 2010 | 87 | 2010 |
| Performance assessment of micro and nano solid lubricant suspensions in vegetable oils during machining R Padmini, PV Krishna, GK Mohana Rao Proceedings of the Institution of Mechanical Engineers, Part B: Journal of …, 2015 | 64 | 2015 |
| Experimental evaluation of nano-molybdenum disulphide and nano-boric acid suspensions in vegetable oils as prospective cutting fluids during turning of AISI 1040 steel R Padmini, PV Krishna, GK Mohana Rao Proceedings of the Institution of Mechanical Engineers, Part J: Journal of …, 2016 | 54 | 2016 |
| Development of hybrid model and optimization of metal removal rate in electric discharge machining using artificial neural networks and genetic algorithm GKM Rao, GR Janardhana, DH Rao, MS Rao ARPN Journal of Engineering and Applied Sciences 3 (1), 19-30, 2008 | 53 | 2008 |
| Influence of machining parameters on electric discharge machining of maraging steels–An experimental investigation GKM Rao, S Satyanarayana, M Praveen Proceedings of the world congress on engineering 2, 2-4, 2008 | 48 | 2008 |
| Performance evaluation and selection of optimal cutting conditions in turning of Ti-6Al-4V alloy under different cooling conditions MV Ramana, K Srinivasulu, GKM Rao, DH Rao International Journal of Innovative Technology and Creative Engineering 1 (5 …, 2011 | 29 | 2011 |
| Optimization and effect of process parameters on tool wear in turning of titanium alloy under different machining conditions MV Ramana, GKM Rao, DH Rao Int. J. Mater. Mech. Manuf 2 (4), 272, 2014 | 26 | 2014 |
| Effect of axial gap between inlet nozzle and impeller on efficiency and flow pattern in centrifugal fans, numerical and experimental analysis M Gholamian, GKM Rao, B Panitapu Case Studies in Thermal Engineering 1 (1), 26-37, 2013 | 24 | 2013 |
| Experimental investigations, optimization of process parameters and mathematical modeling in turning of titanium alloy under different lubricant conditions MV Ramana, AV Vishnu, GKM Rao, DH Rao Journal of Engineering (IOSRJEN) www. iosrjen. org ISSN 2250, 3021, 2012 | 24 | 2012 |
| Experimental and numerical evaluation of friction stir welds of AA6061-T6 aluminium alloy P Prasanna, BS Rao, GKM Rao, A Prasad ARPN Journal of Engineering and Applied Sciences 5 (6), 1-18, 2010 | 23 | 2010 |
| Grey relational analysis for multi-response optimization of process parameters in green electrical discharge machining of Ti-6Al-4V alloy B Gugulothu, GKM Rao, M Bezabih Materials Today: Proceedings 46, 89-98, 2021 | 19 | 2021 |
| Effect of process parameters on surface roughness in turning of titanium alloy under different conditions of lubrication MV Ramana, AV Vishnu, GKM Rao, DH Rao Recent Adv. Robot. Aeronaut. Mech. Eng 3, 83-91, 2012 | 19 | 2012 |
| Effect of feed rate on the generation of surface roughness in turning MR Reddy, PR Kumar, GKM Rao International Journal of Engineering Science and Technology (IJEST) 3 (11 …, 2011 | 18 | 2011 |
| Optimization of surface roughness and tool wear in sustainable dry turning of Iron based Nickel A286 alloy using Taguchi’s method MV Ramana, GKM Rao, B Sagar, RK Panthangi, BVRR Kumar Cleaner Engineering and Technology 2, 100034, 2021 | 17 | 2021 |
| Chip morphology in turning of Ti-6Al-4V alloy under different machining conditions MV Ramana, GKM Rao, DH Rao J. Prod. Eng 17 (1), 27-32, 2014 | 17 | 2014 |
| Modeling and analysis of resin bonded sand mould system using design of experiments and central composite design B Surekha, DH Rao, GKM Rao, PR Vundavilli, MB Parappagoudar Journal for Manufacturing Science and Production 12 (1), 31-50, 2012 | 15 | 2012 |
| Hybrid modeling and optimization of hardness of surface produced by electric discharge machining using artificial neural networks and genetic algorithm GKM Rao, DH Rao ARPN Journal of Engineering and Applied Sciences 5 (5), 72-81, 2010 | 15 | 2010 |
D Hanumantha RaoMatrusri engineering collegeVerified email at matrusri.edu.in
