| Fabrication and characterization of superhard tungsten boride layers deposited by radio frequency magnetron sputtering J Chrzanowska, Ł Kurpaska, M Giżyński, J Hoffman, Z Szymański, ... Ceramics international 42 (10), 12221-12230, 2016 | 43 | 2016 |
| Statistical analysis of the Portevin–Le Chatelier effect in Inconel 718 at high temperature P Maj, J Zdunek, M Gizynski, J Mizera, KJ Kurzydlowski Materials Science and Engineering: A 619, 158-164, 2014 | 33 | 2014 |
| Investigation of carbon fiber–reinforced thermoplastic polymers using thermogravimetric analysis M Giżyński, B Romelczyk-Baishya Journal of Thermoplastic Composite Materials 34 (1), 126-140, 2021 | 29 | 2021 |
| Columnar and DVC-structured thermal barrier coatings deposited by suspension plasma spray: high-temperature stability and their corrosion resistance to the molten salt X Chen, T Ohnuki, S Kuroda, M Gizynski, H Araki, H Murakami, ... Ceramics International 42 (15), 16822-16832, 2016 | 27 | 2016 |
| Formation and subsequent phase evolution of metastable Ti-Al alloy coatings by kinetic spraying of gas atomized powders M Gizynski, S Miyazaki, J Sienkiewicz, S Kuroda, H Araki, H Murakami, ... Surface and Coatings Technology 315, 240-249, 2017 | 26 | 2017 |
| The effect of process parameters on rhenium diboride films deposited by PLD J Chrzanowska, J Hoffman, P Denis, M Giżyński, T Mościcki Surface and Coatings Technology 277, 15-22, 2015 | 26 | 2015 |
| Comparative study of the failure mechanism of atmospheric and suspension plasma sprayed thermal barrier coatings M Gizynski, X Chen, N Dusautoy, H Araki, S Kuroda, M Watanabe, ... Surface and Coatings Technology 370, 163-176, 2019 | 19 | 2019 |
| Thin WBx and WyTi1− yBx films deposited by combined magnetron sputtering and pulsed laser deposition technique J Chrzanowska-Giżyńska, P Denis, M Giżyński, Ł Kurpaska, I Mihailescu, ... Applied Surface Science 478, 505-513, 2019 | 16 | 2019 |
| High-cycle fatigue strength of ultrafine-grained 5483 Al-Mg alloy at low and elevated temperature in comparison to conventional coarse-grained Al alloys K Majchrowicz, Z Pakieła, M Giżyński, M Karny, M Kulczyk International Journal of Fatigue 106, 81-91, 2018 | 14 | 2018 |
| Fabrication and oxidation resistance of TiAl matrix coatings reinforced with silicide precipitates produced by heat treatment of warm sprayed coatings J Sienkiewicz, S Kuroda, H Murakami, H Araki, M Giżyński, ... Journal of Thermal Spray Technology 27, 1165-1176, 2018 | 11 | 2018 |
| Microstructure and oxidation performance of TiAl-(Cr, Nb, Ta) coatings fabricated by warm spray and high-velocity Oxy-fuel spraying J Sienkiewicz, S Kuroda, H Murakami, H Araki, M Giżyński, ... Journal of Thermal Spray Technology 28, 563-579, 2019 | 10 | 2019 |
| Tungsten borides layers deposited by a nanosecond laser pulse J Chrzanowska-Giżyńska, P Denis, J Hoffman, M Giżyński, T Mościcki, ... Surface and Coatings Technology 335, 181-187, 2018 | 10 | 2018 |
| The low temperature fracture behaviour of hydrostatically extruded ultra-fine grained Armco iron M Gizynski, Z Pakiela, W Chrominski, M Kulczyk Materials Science and Engineering: A 632, 35-42, 2015 | 10 | 2015 |
| Sintering characteristics of thermal barrier YSZ coatings made by suspension plasma spraying M Giżyński, X Chen, H Araki, H Tanaka, S Kuroda, M Watanabe, Z Pakieła Journal of Thermal Spray Technology 31 (5), 1521-1539, 2022 | 3 | 2022 |
| Effect of transverse reinforcement on cracking of CFRP composite laminates under static and fatigue loads M Giżyński Journal of Composite Materials 54 (25), 3755-3766, 2020 | 2 | 2020 |
| The mechanical properties at room and low temperature of P110 steel characterised by means of small punch test B Romelczyk-Baishya, D Lumelskyj, M Stępniewska, M Giżyński, ... Archives of Metallurgy and materials, 159-165-159-165, 2019 | 1 | 2019 |
| Influence of Low Temperature on Mechanical Properties of Carbon Steel P110 Estimated by Means of Small Punch Test M Stępniewska, B Romelczyk-Baishya, T Brynk, M Giżyński, Z Pakieła Proceedings of the 7th International Conference on Fracture Fatigue and Wear …, 2019 | 1 | 2019 |
| Fabrication and Oxidation Resistance of TiAl Matrix Coatings Reinforced with Silicide Precipitates Produced by Heat Treatment of Warm Sprayed Coatings (vol 27, pg 1165, 2018) J Sienkiewicz, S Kuroda, H Murakami, H Araki, M Gizynski, ... JOURNAL OF THERMAL SPRAY TECHNOLOGY 29 (8), 2080-2080, 2020 | | 2020 |
| Correction to: Fabrication and Oxidation Resistance of TiAl Matrix Coatings Reinforced with Silicide Precipitates Produced by Heat Treatment of Warm Sprayed Coatings (Journal … J Sienkiewicz, S Kuroda, H Murakami, H Araki, M Giżyński, ... Journal of Thermal Spray Technology 29 (8), 2080, 2020 | | 2020 |
| Microstructure and Oxidation Performance of TiAl-(Cr, Nb, Ta) Coatings Fabricated by Warm Spray and High-Velocity Oxy-Fuel Spraying (vol 28, pg 563, 2019) J Sienkiewicz, S Kuroda, H Murakami, H Araki, M Gizynski, ... JOURNAL OF THERMAL SPRAY TECHNOLOGY 28 (4), 880-880, 2019 | | 2019 |
