Dr. Kazi Sabiruddin
Dr. Kazi Sabiruddin
Associate Professor, IIT Indore, India
Verified email at iiti.ac.in - Homepage
Title
Cited by
Cited by
Year
Effects of grit blasting on surface properties of steel substrates
KP Chander, M Vashista, K Sabiruddin, S Paul, PP Bandyopadhyay
Materials & Design 30 (8), 2895-2902, 2009
752009
Plasma and HVOF sprayed WC–Co coatings as hard chrome replacement solution
S Hazra, K Sabiruddin, PP Bandyopadhyay
Surface Engineering 28 (1), 37-43, 2012
562012
Analysis of phase transformation in plasma sprayed alumina coatings using Rietveld refinement
K Sabiruddin, J Joardar, PP Bandyopadhyay
Surface and Coatings Technology 204 (20), 3248-3253, 2010
452010
Variation of splat shape with processing conditions in plasma sprayed alumina coatings
K Sabiruddin, PP Bandyopadhyay, G Bolelli, L Lusvarghi
Journal of Materials Processing Technology 211 (3), 450-462, 2011
292011
FIB assisted study of plasma sprayed splat–substrate interfaces: NiAl–stainless steel and alumina–NiAl combinations
G Bolelli, K Sabiruddin, L Lusvarghi, E Gualtieri, S Valeri, ...
Surface and Coatings Technology 205 (2), 363-371, 2010
272010
Measuring mechanical properties of plasma-sprayed alumina coatings by nanoindentation technique
B Dhakar, S Chatterjee, K Sabiruddin
Materials Science and Technology 33 (3), 285-293, 2017
202017
Phase stabilization of plasma-sprayed alumina coatings by spraying mechanically blended alumina–chromia powders
B Dhakar, S Chatterjee, K Sabiruddin
Materials and Manufacturing Processes 32 (4), 355-364, 2017
172017
Application of the analytic hierarchy process for optimization of process parameters in GMAW
K Sabiruddin, S Das, A Bhattacharya
Indian Welding Journal 42 (1), 38-46, 2009
152009
Selection of appropriate process parameters for gas metal arc welding of medium carbon steel specimens
K Sabiruddin, S Bhattacharya, S Das
International Journal of Analytic Hierarchy Process 5, 252-267, 2013
112013
Influence of process parameters on the formation of phases and mechanical properties of plasma sprayed Al2O3–Cr2O3 coatings
B Dhakar, S Chatterjee, K Sabiruddin
Materials research innovations 21 (6), 367-376, 2017
92017
Scratch induced damage in alumina splats deposited on bond coats
K Sabiruddin, PP Bandyopadhyay
Journal of Materials Processing Technology 211 (4), 553-559, 2011
82011
Heat treatment of plasma sprayed alumina-chromia composite coatings
B Dhakar, A Namdeo, S Chatterjee, K Sabiruddin
Surface Engineering 34 (10), 737-746, 2018
42018
Determination of significant factors affecting the bending strength of weld joint prepared by gas metal arc welding
V Pandhare, P Rai, BK Lad, S Das, K Sabiruddin
Int J Mech Eng Res Technol 2 (1), 1-10, 2016
42016
Effect of H2 flow rate and stand-off distance on the formation of phases in plasma-sprayed Al2O3 coatings
B Dhakar, S Chatterjee, K Sabiruddin
Transactions of the IMF 95 (6), 321-327, 2017
32017
Linear reciprocating wear behaviour of plasma-sprayed Al 2 O 3–Cr 2 O 3 coatings at different loading and sliding conditions
B Dhakar, S Chatterjee, K Sabiruddin
Sādhanā 42 (10), 1763-1772, 2017
22017
An investigation on D-gun sprayed Al2O3-SiC coatings
V Sharma, S Kazi
Surface and Coatings Technology 375, 303-314, 2019
12019
A comparative study of sand-blasted and electro-discharge-machined surfaces of steel substrates
V Sharma, K Sabiruddin
Sādhanā 45 (1), 1-13, 2020
2020
Oxidation behaviour of D-gun sprayed Al2O3-3 wt% SiC coating
V Sharma, S Kazi
Surface and Coatings Technology 383, 125238, 2020
2020
Development of explosive coating setup to deposit Ni-Al coating on Steel Substrate
M Sharma, K Sabiruddin
Discipline of Mechanical Engineering, IIT Indore, 2019
2019
Phase stabilization and characterization of plasma sprayed alumina based coatings prepared by mechanically blended alumina-chromia powders
B Dhakar, K Sabiruddin, S Chatterjee
Discipline of Mechanical Engineering, IIT Indore, 2018
2018
The system can't perform the operation now. Try again later.
Articles 1–20