| Evaluation of fracture mechanisms in Al-Si metal matrix nanocomposites produced by three methods of gravity sand casting, squeeze casting and compo casting in semi-solid state MO Shabani, A Baghani, A Khorram, F Heydari Silicon 12, 2977-2987, 2020 | 38 | 2020 |
| Investigation on the effect of mold constraints and cooling rate on residual stress during the sand-casting process of 1086 steel by employing a thermomechanical model A Baghani, P Davami, N Varahram, MO Shabani Metallurgical and Materials Transactions B 45, 1157-1169, 2014 | 35 | 2014 |
| The microstructure and impression creep behavior of cast Mg–4Sn–4Ca alloy H Khalilpour, SM Miresmaeili, A Baghani Materials Science and Engineering: A 652, 365-369, 2016 | 33 | 2016 |
| Application of Computational Fluid Dynamics to study the effects of Sprue Base Geometry on the Surface and Internal Turbulence in gravity casting A Baghani, A Bahmani, P Davami, N Varahram, MO Shabani Proceedings of the Institution of Mechanical Engineers, Part L: Journal of …, 2013 | 24 | 2013 |
| Numerical investigation of the effect of sprue base design on the flow pattern of aluminum gravity casting A Baghani, A Bahmani, P Davami, N Varahram, MO Shabani Defect and Diffusion Forum 344, 43-53, 2013 | 17 | 2013 |
| Understanding the occurrence of the surface turbulence in a nonpressurized bottom gating system: Numerical simulation of the melt flow pattern AM Ali Kheirabi, Amir Baghani, Ahmad Bahmani, Morteza Tamizifar, Parviz ... Proceedings of the Institution of Mechanical Engineers, Part L: Journal of …, 2015 | 16* | 2015 |
| Microstructural evolution and creep properties of Mg-4Sn alloys by addition of calcium up to 4 wt.% A Baghani, H Khalilpour, SM MIRESMAEILI Transactions of Nonferrous Metals Society of China 30 (4), 896-904, 2020 | 14 | 2020 |
| Reducing melt surface turbulence by employing surge and filter in a conventional non-pressurizing gating system: simulation and experiment A Baghani, A Kheirabi, A Bahmani, H Khalilpour Archives of Metallurgy and Materials 66, 2021 | 7 | 2021 |
| Effect of temperature, time, and shear force on the morphology and size of dendrites in A356-Al2O3 composites M Ostad Shabani, A Baghani, MR Rahimipour, M Razavi, M Zakeri, ... Journal of Composite Materials, https://doi.org/10.1177/0021998321105260, 2021 | 4 | 2021 |
| Application of the combined CFD and swarm intelligence for optimization of baffles number in a mixer-settler MO Shabani, A Baghani, MR Rahimipour, M Razavi, M Zakeri, F Heydari Journal of the Indian Chemical Society 98 (12), 100241, 2021 | 3 | 2021 |
| The influence of the casting method on mechanical properties of A356-Al2O3 nanocomposite MO Shabani, A Baghani, MR Rahimipour, M Razavi, M Zakeri, F Heydari Kovove Mater 60, 411-420, 2022 | 2 | 2022 |
| Mechanical and tribological properties as a function of casting process of metal matrix nano composite MO Shabani, A Baghani, MR Rahimipour, M Razavi, M Zakeri, H Zadsar Protection of Metals and Physical Chemistry of Surfaces 58 (4), 743-749, 2022 | 1 | 2022 |
| Modeling of macrosegregation and shrinkage cavity during solidification of a multi-components steel ingot A Baghani The University of Iowa, 2019 | 1 | 2019 |
| The Influence of the Casting Methods and Variables on the Microstructural Properties of A356–SiC Nanocomposite MO Shabani, A Baghani, I Mobasherpour, M Razavi, MR Rahimipour, ... International Journal of Metalcasting, 1-15, 2024 | | 2024 |
| Effects of the Thermo-Physical Properties of Exothermic Sleeves on Solidification Modeling of Steel Casting: Experiment and Simulation A Baghani, S Lemesh, R McCarrick Proceeding of the 77th SFSA Technical and Operating Conference, Paper 3.09, 2023 | | 2023 |
| Metal penetration defects in heavy section steel castings using Phenolic Urethane No-Bake (PUNB) molds: An exploration of its cause, effects and prevention A Baghani, P Kelsey, T Hays Proceedings of the 75th SFSA Technical and Operating Conference, 2021 | | 2021 |
| Mechanical Properties as a Function of Casting Process of Aluminum–Silicon Alloy Matrix Composites A Baghani, MR Rahimipour, M Razavi, M Zakeri, F Heydari | | 2021 |
| Prediction of stress distribution and deflection in a large body core using finite element method A Baghani, T Hays Proceedings of the 74th SFSA Technical and Operating Conference, 2020 | | 2020 |
| Vortex Phenomena Effect in Vertical Non-Pressurized Bottom Gating System in A356 Alloys A kheirabi, M Tamizi far, A Baghani, A Bahmani, P Davami Proceedings of Iran International Aluminum Conference (IIAC2014), 2014 | | 2014 |
| Numerical simulation of surface turbulence and bifilms formation in aluminum low pressure die casting (LPDC) A Baghani, A Bahmani, P Davami | | |
Mohsen Ostad Shabani: PhDFaculty Member at MERCVerified email at merc.ac.ir
