The detection of aeronautical defects in situ on composite structures using Non Destructive Testing C Garnier, ML Pastor, F Eyma, B Lorrain Composite structures 93 (5), 1328-1336, 2011 | 413 | 2011 |
Study of trimming damages of CFRP structures in function of the machining processes and their impact on the mechanical behavior M Haddad, R Zitoune, H Bougherara, F Eyma, B Castanié Composites Part B: Engineering 57, 136-143, 2014 | 174 | 2014 |
Study of the surface defects and dust generated during trimming of CFRP: Influence of tool geometry, machining parameters and cutting speed range M Haddad, R Zitoune, F Eyma, B Castanie Composites Part A: Applied Science and Manufacturing 66, 142-154, 2014 | 167 | 2014 |
Machinability and surface quality during high speed trimming of multi directional CFRP M Haddad, R Zitoune, F Eyma, B Castanié International Journal of Machining and Machinability of Materials 13 (2-3 …, 2013 | 71 | 2013 |
Strains and cutting forces involved in the solid wood rotating cutting process F Eyma, PJ Méausoone, P Martin Journal of materials processing technology 148 (2), 220-225, 2004 | 69 | 2004 |
Experimental investigation of impact behavior of wood-based sandwich structures J Susainathan, F Eyma, E De Luycker, A Cantarel, B Castanie Composites Part A: Applied Science and Manufacturing 109, 10-19, 2018 | 65 | 2018 |
Study of the properties of thirteen tropical wood species to improve the prediction of cutting forces in mode B. F Eyma, PJ Méausoone, P Martin Annals of forest science 61 (1), 55-64, 2004 | 57 | 2004 |
Manufacturing and quasi-static bending behavior of wood-based sandwich structures J Susainathan, F Eyma, E De Luycker, A Cantarel, B Castanie Composite Structures 182, 487-504, 2017 | 53 | 2017 |
Influence of machining process and machining induced surface roughness on mechanical properties of continuous fiber composites M Haddad, R Zitoune, F Eyma, B Castanié Experimental Mechanics 55, 519-528, 2015 | 52 | 2015 |
Wood machining with a focus on French research in the last 50 years B Thibaut, L Denaud, R Collet, R Marchal, J Beauchêne, F Mothe, ... Annals of Forest Science 73, 163-184, 2016 | 39 | 2016 |
Experimental investigation of compression and compression after impact of wood-based sandwich structures J Susainathan, F Eyma, E De Luycker, A Cantarel, C Bouvet, B Castanié Composite Structures 220, 236-249, 2019 | 37 | 2019 |
Utilization of a dynamometric pendulum to estimate cutting forces involved during routing. Comparison with actual calculated values F Eyma, PJ Méausoone, P Larricq, R Marchal Annals of forest science 62 (5), 441-447, 2005 | 37 | 2005 |
Relationship between density and aesthetic attributes of wood and preference of Malagasy consumers T Ramananantoandro, MF Ramanakoto, AH Rajemison, F Eyma Annals of forest science 70, 649-658, 2013 | 29 | 2013 |
Wood peeling process monitoring: a comparison of signal processing methods to estimate veneer average lathe check frequency L BLERON, F EYMA, R MARCHAL, L DENAUD Springer Verlag, 2012 | 26 | 2012 |
Crashworthiness of poplar wood veneer tubes R Guélou, F Eyma, A Cantarel, S Rivallant, B Castanié International Journal of Impact Engineering 147, 103738, 2021 | 23 | 2021 |
Numerical modeling of impact on wood-based sandwich structures J Susainathan, F Eyma, E De Luycker, A Cantarel, B Castanié Mechanics of Advanced Materials and Structures 27 (18), 1583-1598, 2020 | 22 | 2020 |
Effects of machining parameters on raised grain occurring after the application of water-based finishes T Ramananantoandro, F Eyma, C Belloncle, S Rincé, M Irle European Journal of Wood and Wood Products 76, 1323-1333, 2018 | 22 | 2018 |
Moisture content monitoring in glulam structures by embedded sensors via electrical methods H Li, M Perrin, F Eyma, X Jacob, V Gibiat Wood science and technology 52, 733-752, 2018 | 19 | 2018 |
Caractérisation des efforts de coupe de différentes essences de bois à l'aide de leurs paramètres mécaniques F Eyma Université Henri Poincaré-Nancy 1, 2002 | 14 | 2002 |
Surface quality and dust analysis in high speed trimming of CFRP M Haddad, R Zitoune, F Eyma, B Castanié, H Bougherara Applied Mechanics and Materials 232, 57-62, 2012 | 12 | 2012 |